home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Shareware Overload Trio 2
/
Shareware Overload Trio Volume 2 (Chestnut CD-ROM).ISO
/
dir24
/
crcmfhg1.zip
/
MISC
/
FRAUD
/
ALLPHONE
/
ALPINE01.TXT
< prev
next >
Wrap
Text File
|
1993-04-16
|
4KB
|
95 lines
ALPINE 9511, 9525 and 9530.
NOTE: These units are manufactured by Fujitsu and have four NAMS.
The ESN prefix is 150 decimal, 96 hex.
New units will remain locked until programed.
Alpine: 310-326-8000, Outside CA 1-800-421-2284
NAM 1 programing:
1: Turn on power.
2. Confirm unit is locked, if not press F + * (LOCK).
3. Turn power off and on again. Press #626#7764726, this spells
#NAM#PROGRAM on the keypad. This code must be entered within
ten seconds of power up.
4. You will hear a continuous tone once the above step has been
completed. Hold down the * key during this tone. The tone
becomes intermittent. Continue to hold * until the tone
stops. Release *.
5. You are now in program mode, the phone will display the NAM
program step number and the data for that step.
6. The STOR key enters data and increments the step number.
7. The SEND key completes and exits programing mode.
8. If all data has been entered correctly the phone will wake
up in the locked mode. Enter the 3 or 4 digit lock code.
9. If any data was entered incorrectly the phone will emit a
short high tone. Scroll thru ALL entries to confirm, then
press SEND again. NOTE: Even if only one step is incorrect
you must step thru all entries for the phone to recycle when
you press SEND.
TO PROGRAM NAMS 2 THRU 4:
1. With phone powered up and unlocked press F+7+N where N = the
NAM number 2, 3 or 4.
2. Lock the phone. (F+*)
3. Program the additional NAM(S) by following the above
procedures from step 3.
PROGRAMING DATA:
STEP# #OF DIGITS/RANGE DESCRIPTION
01 00001-32767 SIDH
02 0 OR 1 LOCAL USE
03 0 OR 1 MIN MARK
04 10 DIGITS MIN (PHONE #)
05 00-15 STATION CLASS
06 0333 OR 0334 INITIAL PAGING CHANNEL
07 2 DIGITS ACCESS OVERLOAD
08 0 OR 1 PREFERRED SYSTEM
09 2 DIGITS GROUP ID (10 FOR USA)
10 3 OR 4 LOCK CODE
11 1 - 4 CALL TIMER
1 = user changeable, timer off.
2 = 6 second increments.
3 = 30 second increments.
4 = 60 second increments.
12 1 - 4 LOCK MODE
1 = user changeable, manual lock, no
outgoing calls.
2 = manual lock, no incoming or
outgoing calls.
3 = Auto lock, no outgoing calls.
4 = Auto lock, no incoming or
outgoing calls.
13 1 - 5 CALL RESTRICTION MODE
1 = No restriction.
2 = No memory access.
3 = No long distance.
4 = 2 & 3 combined
5 = Memory dialling only.
14 0 - 32767 SIDH INHIBIT
15 0 - 32767 SIDH INHIBIT
16 0 - 32767 SIDH INHIBIT
NOTE: Alpine 9511 does not have SIDH inhibit and will return to step
one having completed step 13.
LOCK: F LOCK. UNLOCK: Three or Four digit code.
SYSTEM SELECT: F11 = A/B, F12 = B/A, F13 = A ONLY, F14 = B ONLY,
F15 = HOME ONLY